2013 Land Pride BB2572
Land Pride's 25 Series Fixed Bar Box Scrapers are ideal for building sites, feedlots, outdoor arenas, and on farm and ranch lanes or roadways. Two welded braces extending from front to rear of bucket plus welded gussets between the side panels and moldboard provide exceptional strength for keeping the Box Scraper square under heavy loads. Dirt rolls off of the roll-formed moldboard while scraping, creating less drag and you will get twice the wear on the cutting edge due to its reversability.
5/16” & 3/8” Heavy side panels-Built heavy to handle the tough jobs.
Square tubing shank support-Many competitors use angle iron. Box tubing is stronger.
Clevis -type lower 3-point hitch-Much stronger than pin type hitch.
4 Position heat treated spring steel shanks-Offers flexibility for deep to shallow settings and Heat-treated for longevity.
Roll-formed moldboard-Roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions.
17” Moldboard height-High material capacity.
Moldboard-Heavy moldboard with precise roll holds its shape under heavy loads.
Heat treated dimpled-on tips-Easy to replace tips that are heat treated for toughness.
Heat-treated, reversible and replaceable cutting blades-Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades.
Rear backfill blade-Rear backfill blade allows for backfilling trenches or foundations.
Warranty-One year parts & labor.
Category 1 3-point hitch with Quick Hitch capability-Fits a wide variety of tractors. Quick hitch capability allows for easy hook-up.
Heavy 4” x 4” X 5/16" front beam with 5/16” x 1” shank hole reinforcement-Reinforcement adds additional strength to shank tube right behind shank where
Strong Bucket Reinforcement-Two welded braces extending from front to rear of bucket plus welded gussets between the side panels and moldboard provide exceptional strength for keeping the Box Scraper square under heavy loads.
2013 Land Pride BB2572
- Max HP
- 55 HP
- (Moldboard) - Roll-Formed Moldboard - 16 3/4” High
- (Panels) - 3/8" thick x 16” high x 24” deep
- ( of-Bucket) - 22”
Reinforcement-Two Welded Braces to Rear of Bucket Gusset Between Side Panel and Moldboard
- Working Width
- 549 pounds
- 14.7 cu. ft.
- Frame Material
- (A-frame)-1/2” x 9” A36 Flat Bar
- Number of Shanks
- Material-3/4” x 2 9/16” x 18” Heat Treated Spring Steel
Vertical Positions-4-positions (2 1/4” & 1/4” above and 1 3/4” & 3 3/4” below scraper end plates)
- Tip Construction-Replaceable heat treated dimpled-on tips
Beam-4” x 4” x 5/16” Square tubing with 5/16” x 1” full length shank reinforcements
- Mechanism - Manual lift with shank pin & hairpin cotter at each shank
- (Blades) - 2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
- 3-Point Hitch
- Double strap lower hitches Cat. I (Fits Land Pride Quick Hitch)
- Overall Unit: One year Parts and Labor/Shanks: Considered wear items (see complete Warranty Statement).